Product Overview
Switch to paypal ordering forms.


ALL gauges require the G-STEP-CIM as a central interface module

Click picture for close up view

G-STEP-SSN

131,00 EUR
(VAT incl.)

110,00 EUR
(excl VAT)

 

Small Single needle Generic
The G-STEP-SSN is a generic single needle gauge. It can be used to place customized faceplates. The bezel can be easily removed. Just remove the needle and the current faceplate. Simply position the customized faceplate and put the needle back in the centre before mounting the bezel on again. It allows for perfect customization.


G-STEP-FF

131,00 EUR
(VAT incl.)

110,00 EUR
(excl VAT)

 

Small Fuel Flow indicator
The G-STEP-FF is based on a single needle gauge is and has the proper faceplate for indication of Fuel flow. The stepper motor gives very smooth needle movements.


G-STEP-ITT

131,00 EUR
(VAT incl.)

110,00 EUR
(excl VAT)

 

Small ITT temperature
The G-STEP-ITT is based on a single needle gauge is and has the proper faceplate to show ITT temperature on a scale above 900 °C. The stepper motor gives very smooth needle movements.

G-STEP-PROP

131,00 EUR
(VAT incl.)

110,00 EUR
(excl VAT)

 

Small PROP RPM
The G-STEP-PROP is based on a single needle gauge is and has the proper faceplate. The stepper motor gives very smooth needle movements.

G-STEP-TRQ

178,50 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small Torque% RPM indicator
The G-STEP-TRQ is based on a single needle gauge with digital display. It has the proper faceplate that torque % in analogue and digital ways. Indication is in % from 0 to 120%. The stepper motor gives very smooth needle movements. The 4 digit digital display gives an accurate (1 decimal) indication of the needle position.

G-STEP-TUR

178,50 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small Turbine% RPM indicator
The G-STEP-TUR is based on a single needle gauge with digital display. It has the proper faceplate that shows torque % in analogue and digital ways. Indication isin % from 0 to 110%. The stepper motor gives very smooth needle movements. The 4 digit digital display gives an accurate (1 decimal) indication of the needle position.

G-STEP-OTP

166,60 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small oil temp / PSI
The G-STEP-OTP is based on a dual needle gauge and has the proper faceplate that shows oil temperature and pressure Indication is in degrees Celsius (°C) from -2 to + 140 C° and in PSI from 0 to 200 PSI. The stepper motor gives very smooth needle movements.


G-STEP-EGTFF

166,60 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small EGT Fuel Flow indicator
The G-STEP-EGTFF is based on a dual needle gauge and has the proper faceplate that shows EGT and fuel. The stepper motor gives very smooth needle movements.

G-STEP-VACAMP

166,60 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small sucction gauge/ammeter
The G-STEP-VACAMP is based on a dual needle gauge and has the proper faceplate that shows suction gauge and ammeter. The stepper motor gives very smooth needle movements.

G-STEP-FQ

166,60 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small Fuel Qualtity Dual L/R
The G-STEP-FQ is based on a dual needle gauge and has the proper faceplate that shows fuel quantity in L and R reservoir. Indication is in %. The stepper motor gives very smooth needle movements.

G-STEP-FL

131,00 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small Flap position indicator
The G-STEP-FL is based on a single needle gauge is and has the proper faceplate for indication Flaps position. The faceplate shows a Boeing flap configuration with 9 positions. The stepper motor gives very smooth needle movements.


G-STEP-AOA

131,00 EUR
(VAT incl.)

150,00 EUR
(excl VAT)

 

Small Angle of Attack
The G-STEP-AOA is based on a single needle gauge is and has the proper faceplate for the angle of attack position. The stepper motor gives very smooth needle movements.

next